Why Choose Anderson?

First-Rate Quality Raw Materials Only

100% Test before Shipment

We tested each battery before shipment:

1.     Charging Voltage and Discharging Voltage

2.     Current

3.     Resistance

4.     Diode

5.     Drop Test—1.2m * 6 times

      1 drop on the front

      1 drop on the back

      1 drop on the left side

      1 drop on the right side

      1 drop on the top

      1 drop on the bottom

6.     Short-Circuit Protection

7.     Charging Function on the original charger

8.     Fitting test on the original two-way radio

Certificates Display

For Anderson Chargers: 

Packing & Delivery

Packing & Delivery

About Anderson

About Anderson Electronics

FAQ

FAQ

Battery Care and Tip

Battery Care and Tips

Here are some simple battery tips which will help your replacement have a longer life cycle. We appreciate your time.

1. Charge your new battery overnight before using it. This will help your battery to obtain maximum battery capacity. 
For Nickel Cadmium (NI-CD)/Nickel Metal Hydride (NI-MH): Charge the battery until the indicator light turns green;
For Lithium Ion (Li-ion)/Polymer: Charge 1-2 hours more additional hours after the indicator light turns green.

2. Do not use your charger as a radio stand. Do not leave your radio and fully-charged battery in the charger while not charging. Continuous charging will shorten battery life.

3. Only charge a battery when needed. Do not recharge a battery when it is not fully discharged. It will be better for you to carry a spare. This is the most cost-effective solution for users requiring longer operating time.

4. In order to minimize capacity loss and cycle life reduction, new, non initialized batteries must be stored in well ventilated, cool and dry locations. If it is made of Chinese cells, then please charge the battery every six months during storage time.